page_banner

JLB005 Waterborne Paste One Coat Paint

Short Description:

The waterborne one coat paint is a quick-dry waterborne product based on high quality waterborne acrylic emulsion resin, pigments, fillers, additive and deionized water. it is non-toxic, pollution-free, with extremely low VOC content which is more than 95% less than the use of conventional paint. It’s suitable for a variety of coating processes, the application is simple, with less materials input, quick-dry, all of which would enable users to reduce the cost while improve the efficiency.


Product Detail

Product Tags

The waterborne one coat paint is a quick-dry waterborne product based on high quality waterborne acrylic emulsion resin, pigments, fillers, additive and deionized water. it is non-toxic, pollution-free, with extremely low VOC content which is more than 95% less than the use of conventional paint. It’s suitable for a variety of coating processes, the application is simple, with less materials input, quick-dry, all of which would enable users to reduce the cost while improve the efficiency. The paint has good permeability, therefore, the resulted coat has an extremely perfect sealing and robust adhesion force. For obtaining a coating with the same performance to the conventional primer + topcoat, the application of one coat paint could reduce half of the workload comparing to the one involving the primer and topcoat separately. The dense paint film can protect the substrate from corrosion by carbonization, it has strong weathering resistance and corrosion resistance, which would further greatly improve its safety. The paint film’s surface is smooth, with uniform color, it allows a reduction to the production cost.
It is suitable for decoration and protection of various steel structures, railway freight wagons, vehicles, agricultural machinery, industrial equipment, vessels, etc.

Features

Fast drying
Self-undercoating
Low odor
Extremely smooth
Economy Waterborne One Coat Paint

Product Details

Type One Coat Paint
Component Single Component
Substrate On prepared Steel
Technology Acrylic

Physical Parameters

Color Black & a range of colors
Sheen Matte
Standard film thickness
Wet film 90μm
Dry film 30μm
Theoretical Coverage Approx. 11.1m2/L
Specific Gravity Approx. 1.25

Mixing Instructions

Single Component Ready to use
Thinner De-ionized water
Tool’s Cleaner Tap Water

Application Instructions

Application Method: Airless Spray Air Spray Brush/Roller
Tip Range: (Graco)  163T-619/621 2~3mm
Spray Pressure (Mpa): 12~15 0.3~0.4
Thinning (by Volume): 0~5% 0~15% 0~5%

Dry Time

Substrate Temp.
(℃)

Touch Dry
(h)

Hard Dry
(h)

Recoat Interval (h)
Min. Max.
5 6 12 48 No limit
20 1.5 6 12 ..
30 1 4 4 ..

Relevant Products

Waterborne Epoxy Resin Primer
Waterborne Acrylic Anti-rust Primer
Waterborne epoxy primer
HJ120 Modified Epoxy General Primer

Packing information

10L or 20L

Surface Preparations

Refer to technical data sheet
Application Conditions
Refer to technical data sheet
Storage
Refer to technical data sheet
Safety
Refer to technical data sheet & MSDS
Special Instructions
Refer to technical data sheet


  • Previous:
  • Next:

  • Write your message here and send it to us